8x10/100/1000Base-T + 4x100/1000Base-X SFP + 4x1G/2.5/10GBase-X SFP+ Layer 3 Industrial Switch

Rating:
SKU
DK3510MI-8T4GS4X
  • Layer 3 Managed Industrial Ethernet Switch
  • 8x10/100/1000Base-T
  • 4x100/1000Base-X SFP
  • 4x1G/2.5/10GBase-X SFP+
  • DC 12 - 58 V input
  • Redundant dual power supply
  • Operating temperature: -40 °C ~ +75 °C
  • Din-rail installation

CPU, RAM, and FLASH

  • CPU: ARM V7 800M
  • RAM: 512MB 4Gbit
  • FLASH:512MB 4Gbit
Attached files
BGN 1,558.80 BGN 1,299.00
BGN 1,558.80 BGN 1,299.00
In stock

Overview

The DPTEK DK3510MI-8T4GS4X is the highly reliable layer 3 managed industrial Ethernet switches with 8-port 10/100/1000-T RJ45, 4-port 100/1000Base-X SFP and 4-port 1G/2.5G/10GBase-X SFP+ interfaces. It supports ERPS redundant network and the self-recovery mechanism is less than 20 ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. DK3510MI-8T4GS4X supports Layer 3 static routing & dynamic routing features and robust layer 2 management function, which can fulfill the special needs of industrial automation applications.

DK3510MI-8T4GS4X is also high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58 V DC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40 °C to +75 °C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.

Features:

  • 8x10/100/1000Base-T RJ45, 4x100/1000Base-X SFP, 4x1G/2.5G/10GBase-X SFP+
  • Redundant power 12 - 58 V input with polarity reverse/over-voltage/over-current protection
  • Support one digital output for relay alarm (terminal block Pin 5/6)
  • Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP
  • Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP, MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP DDM/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
  • Support G.8032 ERPS protocol, recovery time ≤20ms
  • Support 6 kV surge protection and ESD: Air - 15 kV, Contact - 8 kV Protection
  • IP40 fan-less and Din-rail hardware design
  • Operation temperature: -40 °C  ~ +75 °C
More Information
Weight (kg)0.000000
BrandDPTEK
ColorBlack
Country of ManufactureChina
Lan Ports Number8
Network connectorSFP+, RJ45, SFP
Number of Fiber Optical Ports8
Max Data Rate100/1000M, 1G, 2.5G, 10G
Fiber optical portsSFP
Optical ports speed100 Mb/s, 1 Gb/s, 2.5 Gb/s, 10 Gb/s
Lan Ports TypeRJ45 (10/100/1000 Mb/s)
Form FactorDin Rail
PoE StandardNone
Used forIndustrial
Switch ManagementLayer 3
ProtectionIP 40
EAN6977182780539
  • DPTEK Managed Industrial Switches Quick Installation Guide

    Download
  • Datasheet-8*10/100/1000Base-T + 4*100/1000Base-X SFP + 4*1G/2.5/10GBase-X SFP+ Layer 3 Industrial Switch

    Download
Write Your Own Review
You're reviewing:8x10/100/1000Base-T + 4x100/1000Base-X SFP + 4x1G/2.5/10GBase-X SFP+ Layer 3 Industrial Switch