PoE Switch, 24x100M POE + 2x1G + 2xSFP

Features

• Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T
• Supports POE IEEE 802.3af/at compliant Powered Device (PD)
• Modes: Normal switch mode/Extended mode (Port1-24: 250 meters ultra-long transmission)
• Ports 1~24 features POE power supply capability and can be used as Power over Ethernet devices; 2x10/100/1000Base-T Uplink and 2x1000Base-X SFP
• Support full duplex based on IEEE802.3x and half duplex based on Backpressure
• Auto MDI/MDIX crossover for all ports
• Support non-blocking wire speed forwarding
• MAC address auto-learning & auto-aging
• Steel case, the total POE power budget of 320W
• Just Plug and Play

Specifications

• Interface: 24x10/100Mbps POE ports (Data/Power); 2x10/100/1000M uplink RJ45 ports (Data); 2x10/100/1000M uplink SFP slot ports (Data)
• Mode: Normal switch mode/ Extend mode
• Data Transfer Rate: Ethernet: 10Mbps (Half-duplex); 20Mbps (Full-duplex); Fast Ethernet: 100Mbps (Half-duplex); 200Mbps (Full-duplex)
• Power Input POE Standards: Single port maximum power 30W, Whole switch maximum power 320W; Support over-current, over-voltage and short-circuit protection; Support Soft Start of High Power PD; Support sequential boot-up; Power Supply Pin: 12+/36-; AC 110~240V 50/60HZ
• Cabling type: 100Base-TX: Cat 5e or better UTP/STP (≤100 m); 10Base-TX: Cat 5e or better UTP/STP (≤250 m)
• Dimensions (L x W x H): 440 x 180 x 43 mm
• Operation Temperature: 0℃～40℃
• Storage Temperature: -40℃～70℃
• Operation Humidity: 10%～90% RH Non-condensing
• Storage Humidity: 5%～90% RH Non-condensing