Вашата поръчка
Няма добавени продукти към поръчката Ви
AF100SF series is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The FHC0110-3S20A10-LD5 copper-to-fiber module is available in 10/100Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and 100M fiber networks.
- Conversion between different transmission speeds and media types
- Standalone and compact hardware design
- Auto-negotiating Ethernet port (Speed and Half/Full Duplex)
- Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
- Standard open Fiber slots for SFP Transceiver
- Built-in Link Loss Forwarding Technology
- Easy Installation, Easy Troubleshooting
Specification
Standard Compliance
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX standards
IEEE802.3x Flow Control and Back pressure
Connector and Interface
Fiber: SFP 3.3V
RJ-45 Socket: CAT-5 (10/100/1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto- Negotiation Function Support
Link Loose Forward
TX to Fiber: If TX port link is broken, then converter will force the fiber to link down.
Fiber to TX: If Fiber port link is broken, the media converter will force the TX port to link down.
DIP Switch
DIP Switch 1: Fiber Auto-Negotiation/100Mbps Full Duplex mode
DIP Switch 2: TX to Fiber LLF (Link Lose Forwarding) Disable/Enable
DIP Switch 3: Fiber to TX LLF (Link Lose Forwarding) Disable/Enable
LED Indication
FEF,SPD,FX-LINK,TX-LINK,PWR,FDX
Power
Standalone (external adapter): DC 5V / 1A
Dimension
95 × 70 × 26mm(out) power external
Operation Environment
Operating temperature: 0°C ~ 70°C
Storage temperature: - 40°C~ 85°C
Operating humidity: 10 90 non-condensing